J1939 HMI Protocol Converter

J1939 Gateway HMI

J1939 Gateway HMI

A protocol converter and a full featured HMI that provides direct access to engine monitoring parameters from industrial equipment via many different protocols and memory map formats. The HMI offers all the same features of the J1939 Gateway™ with the addition of an operator interface.










The J1939 Gateway™ HMI (Human Machine Interface) is a plug & play protocol converter and a full featured HMI that provides direct access to engine monitoring parameters from industrial equipment via many different protocols and memory map formats. The HMI offers all the same features of the J1939 Gateway™ with the addition of a local operator interface. It is used in applications where engine data needs to be displayed for local users and operators in addition to being accessed from a PLC or SCADA system. No intermediate devices are needed and little or no setup is required.

Whether the environment you need to interface with is in a factory or a remote location, Monico can configure our HMIs to give you an easy to use operator interface.
 

Feature List HMI8.20.15 



More Than a J1939 HMI Protocol Converter

As with all of our products, this HMI acts as much more than just a protocol converter. It allows for an easy way to assess and control what is occurring with various pieces of equipment in your industrial system. And with features that include a built-in web server for access to your equipment from any location with internet access and a SMTP/SMS mail server for email and text alerts, our HMI lets you monitor your equipment remotely.

In addition to J1939 protocol conversion and the ability to act as a CAN bus remote HMI, the J1939 Gateway HMI also translates fault codes into text descriptions and can integrate your engine or genset as well as supporting equipment into an overall monitoring system. Our HMI screens provide a simple way for you to do all of this, as well as interact with your system. We can assist you regardless of what industrial sector you are in, the machinery combination you have and what protocols you are communicating with.

Monico’s HMI units have extra bright backlighting for easy viewing outdoors and are UV protected. All of our HMI products are approved for hazardous locations installations under UL1604. Other features such as our available pre-configured solutions for over 400 data registers, a built-in web server and an AMTP/SMS server, real time data logging and a full featured touch screen with graphics capability make our HMIs easy to install and use as well as very powerful.

There is no better product than our J1939 Gateway HMI for communicating over SAE J1939 and CAN bus when you want the added benefit of a local touch screen operator interface. Monico’s engineers and technical support specialists have spent extensive time working with customers in need of a remote CAN bus remote HMI, J1939 HMI protocol converter, SAE J1939 communication, overall engine or genset monitoring and help integrating equipment into an overall monitoring system.

Specifics on the J1939 Gateway HMI

Input

  • Two-Wire Data Link
  • Concentrate data from other devices using multiple protocols

Host Interfaces

  • Modbus RTU & TCP/IP via Serial and Ethernet
  • PLC protocols including Allen Bradley, GE Fanuc, Siemens, BACnet and many more
  • Same capabilities as the J1939 Gateway with the addition of a Color TFT Touch Screen HMI
Signup for our newsletter!